Question

What process does Nick's Building Supply follow for Wood Door Finishing?

Comments

Wood door finishing refers to the process of refining or protecting a wooden surface of the door or furniture.Below is the process that Nick's Building Supply, Inc. follows :

1.We carefully disassemble the door system.This helps to get behind the hinges, at all the nook & crannies, all sides of the door (including the top and bottom).

2.We caulk and glaze all glass areas to help prevent any water leakage.

3.We tape off all windows and threshold to protect from over-spray finish.

4.Wood filler is applied where needed to fill in the grain and to help attain better smoothness.

We offer over 15 finish colors along with many custom finishes.

For more infromation , visit our Website

Answer 1

. We carefully disassemble the door system. This helps to get behind the hinges, at all the nook & crannies, all 6 sides of the door (including the top and bottom). 2. We caulk and glaze all glass areas to help prevent any water intrusion. 3. We tape off all windows and threshold to protect from over-spray finish. 4. Wood filler is applied where needed to help attain smoothness. 5. If there are any imperfections in the wood itself, we remove them with a steaming process. 6. Bare wood sanding by hand is done. 7. Stain with UV protection is applied by spray gun. This process soaks into wood to give added sun protection. 8. Generous block sanding is applied to all six sides of door. 9. Inspect door for any imperfections

Answer 2

you should have Nick's Finish your Doors?

Your Professional Wood Finishers will Apply our 20 Step Process to Protect your Beautiful Wood Doors.

Labor intensive and individually Block sanded by hand and Booth Sprayed for a Furniture Like Finish every time.

Does your painter use Exterior Grade products?

We only use Eco Friendly, low VOC, transparent acrylic water-based penetrating wood Stains and

Sanding Sealers. Then a Non-Yellowing, Water Resistant, Crystal Clear Top-Coat Finish with UV Absorbers

that provides a Durable Mar-Resistant coating with Excellent Adhesion and Easy Touch-up Capabilities.

Built and Finished in the USA, Crown Point, Indiana

We take the utmost pride in finishing each and every door by hand.

Answer 3

Nick's Building Supply follows a comprehensive process for Wood Door Finishing:

1. Preparation: The door is thoroughly cleaned, removing dirt, paint, and other debris. The surface is then sanded to ensure a smooth finish.

2. Staining: The door is stained with the color of choice. This can be a single color or a combination of colors.

3. Finishing: A clear finish is applied to protect the wood and give it a glossy sheen.

4. Final Inspection: The door is inspected for any imperfections and any necessary repairs are made.

5. Delivery: The door is delivered to the customer's home or business.

Answer 4

Nick's Building Supply follows a process that includes contact with the manufacturer, ordering the necessary supplies, and then working with the customer to complete the final touches.

Answer 5

1.We carefully disassemble the door system.This helps to get behind the hinges, at all the nook & crannies, all sides of the door (including the top and bottom).

2.We caulk and glaze all glass areas to help prevent any water leakage.

3.We tape off all windows and threshold to protect from over-spray finish.

4.Wood filler is applied where needed to fill in the grain and to help attain better smoothness

Answer 6

Nick's Building Supply offers pre-finishing for wood doors, which includes sanding, staining, and applying a clear coat for a durable finish.