Question

How can we repair a water-damaged laptop?

Answer 1

I suggest to send it to the repair shop. If you do it on yourself it might be worsen and when you send it to the repair shop late it may be expensive than before it get worst.

Answer 2

I suggest you take it to a repair shop, because if you do it yourself it might be worse, and it will be expensive. Before trying to fix it yourself will cost you?

Comments

Thanks a lot brother for this amazing answer.

It was very helpful , seems that you have good knowledge of this topic, thank you

Answer 3

This is what I cannot solve. Once it was damaged by water, we cannot do anything about it. If it is possible to be fixed with expensive components, then it is better to buy a new one.

Answer 4

You can clean the water on the surface and use a hair dryer to dry rest of the water. Apply low heat on the keyboards, otherwise keys get damaged. Place the laptop in such a way that water drops out of the system. After 24 hours try to start the system. Take to repair shop if it doesn't works.

Answer 5

Repairing a water-damaged laptop is a complex process that requires technical expertise. Here are the steps you can follow:

Disconnect the power source immediately and remove the battery.

Dry the laptop as much as possible by wiping it with a clean cloth.

If the laptop has been exposed to liquid for an extended period, it's best to let it dry completely for at least 48 hours.

Once it's completely dry, reattach the battery and try turning it on. If it doesn't turn on, try a different power source or charging cable.

If the laptop still doesn't turn on, disassemble it carefully to inspect the interior components for damage. Look for any signs of corrosion on the circuit board and other components.

If you find any damaged components, such as a corroded battery or a damaged hard drive, they will need to be replaced.

Reassemble the laptop and test it to see if it's working properly.

If the laptop is still not working, it's best to seek professional help. Repairing a water-damaged laptop is a complex process that requires technical expertise and specialized equipment.

Answer 6

To repair a water-damaged laptop, turn it off and unplug it, remove the battery, dry it completely, disassemble it, clean affected parts with alcohol, let it dry again, reassemble it, and test. Seek professional assistance if needed.

Answer 7

To repair a water-damaged laptop, immediately turn it off, remove the battery, and dry it out by placing it in a dry and warm environment for a few days. If the damage is severe, seek professional help to avoid further damage.

Answer 8

Once your laptop screen has been damaged the best solution is to take it to the repair and if those who sold it to you to avoid misunderstanding .

Answer 9

Step 1 – Turn it off. 

Step 2 – Turn it upside down. 

Step 3 – Remove the battery. 

Step 4 – Remove any peripheral devices.

Step 5 – Soak up moisture. 

Step 6 – Remove components. 

Step 7 – Dry your laptop.

Answer 10

Place the laptop in such a way that water drops out of the system. After 24 hours try to start the system. Take to repair shop if it doesn't works.