menu search
brightness_auto
Ask or Answer anything Anonymously! No sign-up is needed!
more_vert
Best iPad Repair Shop in Pomona,USA

11 Answers

more_vert

there will be generally 2 problems when an Ipad won't turn on. those are:

1. battery dead: if this is the reason make it charge for atleast one hour and turn on it
2. software issue: if this is the reason then hold the home and on/off button and the same time for 15 to 20 seconds then it will turn on.
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
Press both the Home and Sleep/Wake buttons at the top of the screen for at least 10 seconds until you see the Apple logo. Charge the battery. If the iPad doesn't boot up after a few seconds, the battery is probably drained. In this case, connect the iPad to a wall outlet using the cable and charger that came with it.
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
If your screen is black or frozen, you might need to force restart your device. ... You can force restart your device even if the screen is black or the buttons aren't responding. Follow these steps: iPad models that don't have a Home button: Press and quickly release the Volume Up button.
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
The reason why your ipad won't turn on.One of the most likely reason may lay in the hardware damage that caused by water damage,screen broken or incorrect screen replacement.Otherwise it may be related to the software of your device which can be due to system crash,jailbreak failure or other factors.

Maybe you can try to use TunesKit ios system recovery software to repair it.
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
There is a probability that it has problem with battery or charging port 

but you have to Go to technician to run a diagnostic test on it 

To locate and have a solutions on Problem that it has 
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
A dead battery could be the reason why your iPad is not turning on even when plugged in . failing batteries display a low battery indicator but until there is enough power to allow it to function
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
Press and hold both the Home button and the top button until you see the Apple logo. If your iPad doesn't turn on, follow these steps to check your hardware and charge your device. You might need to charge for up to an hour. If your iPad still doesn't turn on, contact Apple Support.
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
If your iPad won't turn on, here are some potential causes and solutions:

1. Battery drain: Connect your iPad to a power source and let it charge for some time. Then try turning it on again.

2. Power button issue: Ensure that the power button is not stuck or damaged. Try pressing it firmly and see if the iPad responds.

3. Software issues: Perform a hard reset by simultaneously pressing and holding the Home button and the Power button until the Apple logo appears. This can help resolve software-related problems that may be preventing the iPad from turning on.

4. Hardware problems: If none of the above steps work, there may be a hardware issue. Contact Apple Support or visit an authorized service provider for further assistance and diagnostics.

Remember, these are general troubleshooting steps, and if the problem persists, it's best to seek professional help.
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
There are usually 2 reasons for this to happen the first is that your battery is dead and the other one is that the software died to the hardware got damaged and that is the reason it is not opening.
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
There is a probability that it has problem with battery or charging port 

but you have to Go to technician to run a diagnostic test on it 

To locate and have a solutions on Problem that it has  there alot
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
more_vert
If your iPad won't turn on, consider these troubleshooting steps:

Check the Battery: Ensure that your iPad has sufficient battery charge. Connect it to a power source using the original charger and cable, then wait for a while before attempting to turn it on.

Hard Reset: Perform a hard reset by pressing and holding the Home button (or the volume down button on iPad models without a Home button) and the Power button simultaneously for about 10 seconds until you see the Apple logo.

Inspect for Damage: Check for any physical damage, like a cracked screen or water damage. If present, it may be a hardware issue.

Connect to iTunes or Finder: Connect your iPad to a computer, open iTunes or Finder, and see if your device is recognized. If it is, try updating the iOS software.

Try Different Charger and Cable: Test with a different charger and cable to rule out any issues with the charging accessories.

If these steps don't resolve the problem, there may be a more serious hardware issue, and it's advisable to contact Apple Support or visit an Apple Store for further assistance.
thumb_up_off_alt 0 like thumb_down_off_alt 0 dislike
Whenever you have a question in your mind, just drop it on Answeree. Help our community grow.
...