Everybody understands that a computer cannot function without RAM since RAM is the most important component of the computer. People cannot survive without oxygen, and computers cannot function without RAM. The processor shuts down when the RAM runs out.
If your computer's RAM has just died and you want to repair it, don't worry, I will show you how to do it in a concise manner.
If your query is how to fix dead RAM, this answer will teach you how to do it rapidly since it will walk you through the entire procedure from start to finish.
How To Recover Dead RAM?
Before you can fix a dead RAM, you must first clean it thoroughly. It's also possible that your RAM isn't dead; after cleaning it properly, you may test it on a computer. If it works, there's nothing else you can do.
Equipment required
-
A fresh towel
-
Eraser for pencils
-
Cotton bar/brush
-
Thinner/petrol
Step 1
To effectively clean RAM, you must remove it from its slot and then thoroughly rinse it.
Step 2
Place your RAM on the cloth and use a soft eraser to gently touch the gold contacts.
Step 3
After completing the aforementioned steps, gently rinse the RAM with thinner or petrol using a cotton bar/brush.
How To Recover Dead RAM?
Purchasing fresh RAM is expensive. It saves a lot of money if a dead RAM can be resurrected. A dead RAM may be repaired using two natural approaches. Let's look at how to revive a dead RAM.
Equipment required
-
Foil Paper
-
Oven
-
A heat gun
Method 1
Step 1
Preheat your oven to the lowest setting. (Do not use a microwave; the Printed Circuit Board may be damaged)
Step 2
Wrap the RAM with foil paper completely so that no part of it can be seen outside.
Step 3
When your oven is ready to bake, roast the RAM for 4 to 5 minutes on foil paper.
Step 4
After 4 to 5 minutes of baking, remove the pan from the oven and set it aside to cool.
Step 5
Open your computer case and install the RAM when the RAM has cooled.
Method 2
Step 1
First, preheat the hot gun.
Step 2
Apply regular heat to the RAM.
Step 3
Allow time for the RAM to cool.
Step 4
Install the RAM on the computer when it has cooled.
Attempt to start your PC now. If your computer boots up without errors, you've successfully repaired
your RAM.
Don't do anything if your RAM is still warranting. Remove the RAM from your computer and send it to the manufacturer's repair centre or contact customer service for assistance.
Conclusion
I am attempting to assist you in determining how to repair dead RAM. You may resurrect your dead RAM and save a lot of money by following the procedure above.
I am not sure if these approaches will be effective but they do work 95% of the time. If the procedure does not work for you, you are in the 5% who ill need to upgrade your computer's RAM.